Engine maintenance key 4 points

1. Grinding: that is, grinding. This is the basis for extending the service life. Whether it is a new car or an overhauled engine, it must be run in according to the rules before it can be put into normal operation.
2. Net: namely, oil, water, air and body net. Diesel oil and gasoline are the main fuel of the engine. If diesel oil and gasoline are not pure, they will make the precise body wear, increase the clearance, cause oil leakage, drop oil, reduce the oil supply pressure, increase the clearance, and even cause the oil circuit blockage, holding shaft burning tile and other serious faults. If there is a lot of dust in the air, it will accelerate the wear of cylinder liner, piston and piston ring. If the cooling water is not pure, it will make the scale of the cooling system blocked, hinder the heat dissipation of the engine, the lubrication condition is poor, and the body wear is serious. If the exterior of the body is not clean, the surface will be corroded and the service life will be shortened.
3. Sufficient: that is, sufficient oil, water and air. Diesel oil, gasoline and air supply is not timely or interrupted, there will be difficulties in starting, poor combustion, power decline, the engine can not operate normally and other phenomena. If the oil supply is insufficient or interrupted, the engine lubrication will be poor, the body wear is serious and even the phenomenon of burning tile. If the cooling water is insufficient, the machine temperature will be too high, the power will decrease, the wear will be aggravated, and the service life will be reduced.
4. Inspection: that is, often check the fastening part. Because diesel engine and gasoline engine are affected by shock and uneven load during use, bolts and nuts are easy to loosen. There are various parts of the adjustment bolts to check, so as not to cause loose damage to the body accident.
5. Pay attention to more engine cylinder block products of Changde Daheng Machinery Co., LTD., and learn more product knowledge!